Engine Performance Calculator |
このアプリは現在ストアで閲覧することができません。 | ||||
価格 | 120円 | ダウンロード |
||
---|---|---|---|---|
ジャンル | ユーティリティ | |||
サイズ | 10.8MB | |||
開発者 | Jeremy Eubanks | |||
順位 |
| |||
リリース日 | 2017-10-19 10:19:22 | 評価 | 評価が取得できませんでした。 | |
互換性 | iOS 10.3以降が必要です。 iPhone、iPad および iPod touch 対応。 | |||
|
||||
This application contains four sequential pages with calculations commonly used in engine performance development of four-stroke internal combustion engines (spark-ignited and diesel). This application works in both metric and English units.
The application pages are organized as follows:
1. Displacement: The user defines the engine displacement by specifying bore, stroke, and number of cylinders.
2. Operating Point: The user defines the operating point of interest by specifying engine speed and load. Load may be specified as power, torque, or BMEP. The remaining parameters are then calculated.
3. Fuel Flow: This page calculates fuel flow based on user inputs for efficiency and lower heating value of the fuel. Efficiency may be specified as BSFC or fuel conversion efficiency (i.e. thermal efficiency). The remaining parameter is then calculated. The info button provides LHV reference values for common fuel types.
4. Intake and In-Cylinder Pressures: This page calculates air flow, EGR flow (if applicable), intake manifold pressure required, and estimated peak firing pressure, from user input parameters of air-fuel ratio, volumetric efficiency, % EGR (which may be left blank), intake manifold air temperature, compression ratio, and ratio of specific heats (i.e. gamma) via slider to range of 1.30-1.40.
Additional notes:
Intake manifold pressure is calculated from ideal gas law, and serves as a relative indication of compressor requirements for turbocharged engine applications. Please note that intake manifold temperature should take into account mixing of intake air with EGR. Estimation of peak firing pressure comes from calculation of motoring pressure, based on initial pressure of intake charge (i.e. intake manifold pressure), compression ratio, and gamma, with approximately 30 bar added to account for combustion event. Please note that this estimated value should be used for relative comparison purposes only, as actual peak firing pressures will vary based on combustion mode, phasing, and duration.
更新履歴
Revised app icon
The application pages are organized as follows:
1. Displacement: The user defines the engine displacement by specifying bore, stroke, and number of cylinders.
2. Operating Point: The user defines the operating point of interest by specifying engine speed and load. Load may be specified as power, torque, or BMEP. The remaining parameters are then calculated.
3. Fuel Flow: This page calculates fuel flow based on user inputs for efficiency and lower heating value of the fuel. Efficiency may be specified as BSFC or fuel conversion efficiency (i.e. thermal efficiency). The remaining parameter is then calculated. The info button provides LHV reference values for common fuel types.
4. Intake and In-Cylinder Pressures: This page calculates air flow, EGR flow (if applicable), intake manifold pressure required, and estimated peak firing pressure, from user input parameters of air-fuel ratio, volumetric efficiency, % EGR (which may be left blank), intake manifold air temperature, compression ratio, and ratio of specific heats (i.e. gamma) via slider to range of 1.30-1.40.
Additional notes:
Intake manifold pressure is calculated from ideal gas law, and serves as a relative indication of compressor requirements for turbocharged engine applications. Please note that intake manifold temperature should take into account mixing of intake air with EGR. Estimation of peak firing pressure comes from calculation of motoring pressure, based on initial pressure of intake charge (i.e. intake manifold pressure), compression ratio, and gamma, with approximately 30 bar added to account for combustion event. Please note that this estimated value should be used for relative comparison purposes only, as actual peak firing pressures will vary based on combustion mode, phasing, and duration.
更新履歴
Revised app icon
ブログパーツ第二弾を公開しました!ホームページでアプリの順位・価格・周辺ランキングをご紹介頂けます。
ブログパーツ第2弾!
アプリの周辺ランキングを表示するブログパーツです。価格・順位共に自動で最新情報に更新されるのでアプリの状態チェックにも最適です。
ランキング圏外の場合でも周辺ランキングの代わりに説明文を表示にするので安心です。
サンプルが気に入りましたら、下に表示されたHTMLタグをそのままページに貼り付けることでご利用頂けます。ただし、一般公開されているページでご使用頂かないと表示されませんのでご注意ください。
幅200px版
幅320px版
Now Loading...
「iPhone & iPad アプリランキング」は、最新かつ詳細なアプリ情報をご紹介しているサイトです。
お探しのアプリに出会えるように様々な切り口でページをご用意しております。
「メニュー」よりぜひアプリ探しにお役立て下さい。
Presents by $$308413110 スマホからのアクセスにはQRコードをご活用ください。 →
Now loading...