 |
Translink Gateway 3 |
|---|
| この情報はストアのものより古い可能性がございます。 | ||||
|
価格 | 無料 | ダウンロード |
|
|---|---|---|---|---|
| ｼﾞｬﾝﾙ | ライフスタイル | |||
サイズ | 15.5MB | |||
| 開発者 | Rohan Hamer | |||
| 順位 |
| |||
| ﾘﾘｰｽ日 | 2015-03-26 10:29:46 | 評価 | 評価が取得できませんでした。 | |
| 互換性 | iOS 9.0以降が必要です。 iPhone、iPad および iPod touch 対応。 | |||
The Translink C-Bus gateway v3 provides 2 way communication and control of Clipsal's C-Bus lighting and automation systems using Apples iPhone or iPad.
Consisting of a combination of hardware controller (purchased Separately) and software app, the Translink allows users the freedom of monitoring and control from anywhere inside their wireless network, or anywhere in the world via the internet.
Easy to install and easy to configure, with the ability for end users to setup and change pages however and whenever they like.
The Translink group of products provide a gateway into a Clipsal C-Bus network, and present the user with an easy to use interface with real time viewing and control of their network.
Designed for home and commercial use, the Translink can be used where ever wireless control is needed.
The Translink App is a native Apple iOS application which runs on both the iPad and iPhoneand can be used as a low cost remote control for conference rooms or presentation areas).
In Addition the iOS app allows for user customisation of pages, enabling the end user to setup or change the pages as they like without the need for a service call by the installer.
Multiple Translink Controllers for different systems, floors or even properties can be accessed from a single iOS device by simply selecting from a menu. Each Translink controller has its own set of configuration pages.
New In Version 3:
+ Includes support for C-Bus enabled Alarm panels such as HomeSafe, Ness D8/16 and Ness M1.
+ Soft keypad for arming and disarming alarm.
+ Support for C-Bus Matrix audio selection with dedicated widgets.
+ Support for HVAC Temperature application broadcast messages from newer C-Bus Thermostats
+ Active Icons that change appearance with group address state (where applicable).
+ Over 40 new icons, plus many redrawn for active state display.
+ 64 bit support.
+ iOS 9 + support.
NOTES:
* This app requires the purchase of a Translink Controller V3 or a firmware upgrade to existing V2.x Translink Controllers.
http://www.hamfield.com.au
更新履歴
Fixed iPad Settings Layout Issue
Consisting of a combination of hardware controller (purchased Separately) and software app, the Translink allows users the freedom of monitoring and control from anywhere inside their wireless network, or anywhere in the world via the internet.
Easy to install and easy to configure, with the ability for end users to setup and change pages however and whenever they like.
The Translink group of products provide a gateway into a Clipsal C-Bus network, and present the user with an easy to use interface with real time viewing and control of their network.
Designed for home and commercial use, the Translink can be used where ever wireless control is needed.
The Translink App is a native Apple iOS application which runs on both the iPad and iPhoneand can be used as a low cost remote control for conference rooms or presentation areas).
In Addition the iOS app allows for user customisation of pages, enabling the end user to setup or change the pages as they like without the need for a service call by the installer.
Multiple Translink Controllers for different systems, floors or even properties can be accessed from a single iOS device by simply selecting from a menu. Each Translink controller has its own set of configuration pages.
New In Version 3:
+ Includes support for C-Bus enabled Alarm panels such as HomeSafe, Ness D8/16 and Ness M1.
+ Soft keypad for arming and disarming alarm.
+ Support for C-Bus Matrix audio selection with dedicated widgets.
+ Support for HVAC Temperature application broadcast messages from newer C-Bus Thermostats
+ Active Icons that change appearance with group address state (where applicable).
+ Over 40 new icons, plus many redrawn for active state display.
+ 64 bit support.
+ iOS 9 + support.
NOTES:
* This app requires the purchase of a Translink Controller V3 or a firmware upgrade to existing V2.x Translink Controllers.
http://www.hamfield.com.au
更新履歴
Fixed iPad Settings Layout Issue
ブログパーツ第二弾を公開しました！ホームページでアプリの順位・価格・周辺ランキングをご紹介頂けます。
ブログパーツ第2弾！
アプリの周辺ランキングを表示するブログパーツです。価格・順位共に自動で最新情報に更新されるのでアプリの状態チェックにも最適です。
ランキング圏外の場合でも周辺ランキングの代わりに説明文を表示にするので安心です。
サンプルが気に入りましたら、下に表示されたHTMLタグをそのままページに貼り付けることでご利用頂けます。ただし、一般公開されているページでご使用頂かないと表示されませんのでご注意ください。
幅200px版
幅320px版
お気に入りのアプリをご紹介頂くためのブログパーツです。アプリの価格や順位表示は毎日自動更新♪
サンプルが気に入りましたら、下に表示されたHTMLタグをそのままページに貼り付けることでご利用頂けます。
※配信を停止させていただく可能性もございますので、タグの改変はご遠慮ください。
Now Loading...
「iPhone & iPad アプリランキング」は、最新かつ詳細なアプリ情報をご紹介しているサイトです。
お探しのアプリに出会えるように様々な切り口でページをご用意しております。
「メニュー」よりぜひアプリ探しにお役立て下さい。
Presents by $$308413110 スマホからのアクセスにはQRコードをご活用ください。 →
Now loading...