ProSafFire

ProSafFire accesses a cloud database of over 1,300 inspection items / questions in 12 plant fire protection & safety modules; Centrifugal Fire Pumps & Firewater Tanks, Vertical Turbine Fire Pumps & Reservoirs, Firewater Systems - Underground Mains / Hydrant / Monitor Systems, Fixed Waterspray / Deluge Systems, Automatic Sprinkler Systems, Gaseous Fire Suppression Systems, Fixed Foam Skid Systems, Fire Detection, Gas Detection, Fire Extinguishers, Fireproofing - Structural and Process, and Emergency Showers & Eyewash stations.
Examples of questions include:
The Waterspray / Deluge system module has 77 questions, e.g. "Do the threads match Fire Department hose fittings, or the connector type (e.g. Storz)?", "Is the pilot air makeup / maintenance device equipped with restricting orifice and NC bypass (labelled to keep closed)?", "Is there a pressure gauge connection from the hydraulically most remote point of the deluge system, at an accessible location for trip testing?”
The Structural Fireproofing module has 49 questions, e.g. "Are diagonal and knee bracing elements fireproofed, except where required only for wind or seismic loads?", "Is fireproofing on a routine inspection program for CUI (corrosion under insulation)?", "Do cable openings through the EIV fireproofing system have an approved fire-stopping system such as intumescent mastic cable gland?”
The Combustible and Toxic Gas Detection module has 162 questions, e.g. "Is the detector / controller / display installed with conduit / cable entries facing downwards where practicable to avoid water ingress / condensation?", "Have any protective covers or bags installed during construction or maintenance, or red plastic shipping / storage covers been removed from the gas detector?", "Is it understood that high flammable concentrations, e.g. over 100% LEL, can cause unreliable readings of a catalytic sensor?", "Are gas 'bump' tests and calibrations of the spot IR gas detector performed at the manufacturer's recommended frequency (e.g. annual for some)?", "For open path IR gas detection is the floor / grade marked with the beam path to minimize temporary obstructions?"