Jetting for Beta 2T Moto

この情報はストアのものより古い可能性がございます。
価格 1000円
ダウンロード
ジャンルスポーツ
サイズ
39.4MB
開発者Ballistic Solutions LLC
順位
ジャンル別:
---
総合:
---
リリース日2019-03-09 14:09:43
評価
現バージョン:
星5 (2人)
全バージョン:
星5 (2人)
互換性iOS 9.0以降が必要です。
iPhone、iPad および iPod touch 対応。
2013-2023 models
This app is using temperature, altitude, humidity, atmospheric pressure and your engine configuration for calculate optimal jetting (carburetor configuration) and spark plug to use for Beta 2-strokes Enduro, MX moto bikes.
This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station thought internet. Internal barometer is used on supported devices for better precision. If more accuracy is needed, a portable weather station can also be used. Application can run without GPS, WiFi and internet, in this case user has to give the weather data manually.

• For each carburetor configuration, the following values are given: main jet, needle type, needle position, pilot jet, air screw position, throttle valve size, spark plug
• Fine tuning for all these values
• History of all your carburetor configs
• Graphic display of fuel mix quality (Air/Flow Ratio or Lambda)
• Selectable fuel type (gasoline with or without ethanol, Racing fuels available, for example: VP C12, VP 110, VP MRX02)
• Adjustable fuel/oil ratio
• Mix wizard to get the perfect mix ratio (fuel calculator)
• Carburetor ice warning
• Possibility of use automatic weather data or a portable weather station
• If you don't want to share your location, you can manually select any place in the world, the carburetor setups will be adapted for this place
• let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, liters, ml, gallons, oz for fuel, and mb, hPa, mmHg, inHg atm for pressures

Valid for the following 2T models from 2013 to 2023:
• RR 50 (ENDURO, RACING, SPORT, FACTORY, STANDARD)
• RR 125
• RR 200
• RR 250
• RR 250 RACE EDITION
• XTRAINER 250
• RR 300
• RR 300 RACE EDITION
• XTRAINER 300
• RX300

The application contains four tabs, which are described next:

• Results: In this tab main jet, needle type, needle position, pilot jet, air screw position, throttle valve, spark plug are shown. These data are calculated depending on the weather conditions and the engine configuration given in the next tabs.
This tab lets do a fine tuning adjustment for all this values to adapt to the concrete engine.
Besides this jetting information, the air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE- relative horsepower, volumetric content of oxygen, oxygen pressure are shown too.
On this tab, you can also share your settings with your colleagues, or add settings to your favorites.
You can also see in a graphic form the calculated ratio of air and fuel (lambda).

• History: This tab contains the history of all carburetor configurations. If you change the weather, or engine setup, or fine tuning, the new setup will be saved in history.
This tab also contains your favorite settings.

• Engine: You can configure in this screen the information about the engine, that is, engine model, year, spark manufacturer, fuel type, oil mix ratio.

• Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity.
Also this tab allows to use the GPS to get the current position and altitude, and connect to an external service (you can choose one weather data source from several possible) to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
In addition, this application can work with a pressure sensor built into the iPhone. You can see if it is available on your device and turn it on or off.
Also, on this tab, you can manually select any place in the world, the carburetor setups will be adapted for this place.


If you have any doubt about using this App, please, contact us. We answer every question, and we take care of all comments from our users to try to improve our software. We are also users of this application.

更新履歴
• Now you can choose models from 2013 to 2023 year
• Also new models have been added. Such as RX300, RR 50, RR 50 SPORT, RR 50 RACING, RR ENDURO 50, RR ENDURO 50 STANDARD, RR ENDURO 50 FACTORY, RR ENDURO 50 SPORT, RR ENDURO 50 RACING
• Some carburation recommendations have been slightly revised for better performance. Therefore, we strongly recommend that you check the fine tuning sliders, you may need to change them
• New type of fuels have been added: VP Racing C12, VP Racing 110, VP Racing MRX02
• Added new feature: get weather (temperature, pressure, humidity) via Bluetooth using weather stations: Kestrel DROP, Kestrel 5x00, WeatherFlow WEATHERmeter, Skywatch BL
• Added new feature: added the ability to calibrate the barometer built into your phone or tablet (go to the “Settings“ tab, then “Measurement units“)
• Added new feature: added various utilities (unit converters) (go to the “Settings“ tab, then “Utils“)
• We have improved our weather calculator significantly. Now you can manually select which type of atmospheric pressure you are working with (for example if you use portable barometers, weather stations):
- sea level pressure QNH
- sea level pressure QFF
- station pressure (barometric pressure)
• We added the ability to leave text notes for each history in 'History' tab. To do this, open any History, enter edit mode and add a note
• Now you can manually select the translation language. Application contains many special terms and sometimes translations that we offer are not always good. We are sorry. Now, if your phone (for example) in German, but you are unhappy with the translation you can switch to English (for example) only in this app (you don't have to change locale of device). You can find this feature on 'Weather' tab at the very bottom
• On the results tab, click on the drop-down menu 'Weather (AirLab)', new data for tuners are available: Air Density, Relative Air Density, Density Altitude, Station Pressure, SAE - Dyno Correction Factor, SAE - Relative Horsepower, Volumetric Content Of Oxygen, Oxygen Pressure
• Improved functionality for the feature 'Weather for custom location'. We added a search bar where you can enter the location name. Search places easier and faster now
• We added new fuels, this is gasoline with ethanol. It require a richer carburation than regular premium gasoline
• Improved functionality and accuracy of fuel calculator
• Bug fixes for 'share setup with friends' feature
• Fixes for showing 'Carburetor icing alert', now it doesn't overlap other content
• We reworked the altitude determination algorithm for the 'weather for custom location' feature. We hope that now, if you manually selected your location, the altitude will be calculated with much greater accuracy
  • 現在ランキング圏外です。
更新日時:2024年11月27日 16時23分
 
ブログパーツ第二弾を公開しました!ホームページでアプリの順位・価格・周辺ランキングをご紹介頂けます。
ブログパーツ第2弾!

アプリの周辺ランキングを表示するブログパーツです。価格・順位共に自動で最新情報に更新されるのでアプリの状態チェックにも最適です。
ランキング圏外の場合でも周辺ランキングの代わりに説明文を表示にするので安心です。

サンプルが気に入りましたら、下に表示されたHTMLタグをそのままページに貼り付けることでご利用頂けます。ただし、一般公開されているページでご使用頂かないと表示されませんのでご注意ください。

幅200px版

幅320px版
 
Now Loading...

「iPhone & iPad アプリランキング」は、最新かつ詳細なアプリ情報をご紹介しているサイトです。 お探しのアプリに出会えるように様々な切り口でページをご用意しております。
メニュー」よりぜひアプリ探しにお役立て下さい。

  コンタクト   プライバシーポリシー

Presents by $$308413110    スマホからのアクセスにはQRコードをご活用ください。 →

Now loading...screenshot
スマートフォン用サイトへ >